How To Update Snap On Solus Edge

How to Update a Snap-On Solus

By Melissa King

Updated September 28, 2017

Items you volition need

Update master CompactFlash (CF) bill of fare
Power supply cord

i car image by Brett Bouwer from Fotolia.com

Snap-On's Solus diagnostic scanner provides a way to perform tests on restriction systems, engines and transmissions. The scanner is used to detect the reason for a lit check-engine calorie-free, as well every bit other diagnostic lights such as those for the automobile's battery or air numberless. On occasion, an update may be released for the Solus scanner that provides the device with the latest software. The update is stored on a CompactFlash card that tin can be purchased from the Snap-On website. One time this carte du jour is inserted in the Solus, the update process begins.

Purchase the latest Solus update from the Snap-On website (run into Resource). The update is mailed to your address on a CompactFlash (CF) carte du jour.

Plough off the power to the Solus by pressing the "Power" button. Pull out any CompactFlash (CF) cards that are inserted in the top two slots.

Slide the update master CF bill of fare into the slot labeled "CF slot 1."

Connect the 2.5-mm end of the power supply cord into the ability jack on the left side of the Solus. Plug the other stop of the cord into a wall power outlet.

Press the "Power" push button. The update begins automatically. If the update software causes the device to turn off, turn the Solus back on to continue the update. Wait for the primary bill of fare to announced before using the Solus.